View Single Post
  #13  
Old 06-05-2008, 12:04 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
OK,

I went ahead and powered up the box last night to see what was going on. Now it works. What I am going to do is keep it on for the maximum allowable time of 4 hours and see if it shuts down. I opened it up anyway to see what it is all about. I am quite surprized how many radial electrolytics are in these things. There are just a few SMD caps. There are well over 20 radials, even on the RF board. The power supply is a separate panel with a SIP connector to the RF board. Acutally, easily repairable from a mechanical point of view. I am going to wait for it to fail and then immediately check the caps in the PS for leakage.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Reply With Quote