Quote:
Originally Posted by kbmuri
Is it the power supply that gets mighty hot? Or the tuner/RF modulator?
If the PS, then there's several reasons now to use an outboard power supply.
1) it runs cooler.
2) it runs less noisy (RF interference on Ch3 on older sets)
3) it runs less noisy (spikes hard on internal components)
4) it could run on battery!
5) it's a reason to get out the soldering gun and play.
Especially bullet 4, I'd like to modify one to run on NiCad pack or car battery for use with a battery-powered TV during outages.
Except of course if the outage is caused by a storm, in which case the digital signal will probably block and drop anyway, so it would be moot.
|
#4 is a very good idea! I will have to open up one of mine when I get it to see how easy (or hard) it would be to add a DC jack and a switch to choose between internal and external p/s's.
__________________
JBL XPL-200A's biamped on Yam. PC2602M & M-2 amps with
Ashly XR1001 xover, Yam. CX-830 preamp,
ADC Sound Shaper 2 EQ, Yam. Q-2031 EQ
Yam. DX-350 tuner, Tech. SL-1400 turntable,
Yam. CDX-900U cd, Pan. DVD-RP56 dvd,
Den. DRR-780 tape, Sony SLV-575UC vcr
|