View Single Post
  #5  
Old 05-26-2008, 03:53 PM
Blast's Avatar
Blast Blast is offline
blast, blast...
 
Join Date: Jun 2007
Location: Kansas City
Posts: 237
Quote:
Originally Posted by RetroHacker View Post

<snip> -It would have been really nice if they had put a switched outlet on the back of the box to plug the TV set into. That way, you'd only have to switch off/on the box. It would also get around the problem of the box taking a second to "boot up" - you woudn't notice, since the TV would be warming up too. It shouldn't be too hard for me to add this capability though - a relay and a power socket is all that's needed. <snip>

-Ian
Before you go to the trouble, make sure your set will turn on at power up. Non-remote sets with manual power switches will, of course, but most newer remote sets only sit in standby at power up until one pushes the "power" button. I HAVE seen a few models with an option switch (on the rear panel, or in a menu) that will enable/disable "turn on at power up", however, most of THEM have been hotel sets.

In any event, the set WILL shut OFF when the convertor is powered down. Although, come to think of it, I have a small 9" set that has to auto-program at turn on after every power outage. So... I can't think of a set that I own that I would benefit from a switched outlet on the convertor.

Thanks for your review of the box! A purchase of two of those is in my immediate future.
Reply With Quote
Audiokarma