|
I agree the above. The yoke may have pincushion magnets molded into the front, but they are for side correction and not adjustable. The distortion is likely coming from the yoke or cross over distortion in the PP horizontal output stage. It looks pretty good. I doubt yokes can be found. Probably best to forget it.
The CRT is 12.5 volts, at a battery saving 150 ma. Make sure the 19.5 volt supply is set on and the 13.5 volt supply is right. The 13.5 feeds the audio and CRT filament. The 19.5 feeds everything else.
The Astronaut was Motorola's first attempt at a B&W portable solid state TV and definitely collectable. It is loaded with germanium transistors and can be temperamental, but a solid performer.
|