|
No service switch that I can find. That was one of the first things I checked.
I'll look at the board again later tonight, and start resoldering any IC's with heatsinks that I find. I didn't find anything that looked blown or damaged, so that fusable resistor is probably intact. I guess if it wasn't, it'd read open if I tested it with a multimeter.
EDIT: Took a look at the board, and the three biggest heatsinks have what appear to be transistors on them. I found a smaller heatsink attached to what i'm fairly sure is an IC.
In any case, I found nothing that looks blown or open. A definite idea of where the vertical circuit is would help out ALOT!
|