View Single Post
  #21  
Old 05-11-2008, 10:37 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
There's another chassis you may be interested in: the CTC140. It was used in RCA's high end models from around '87 through around '91. This was a single board chassis with on screen display and user menus similar to current sets. I've seen that chassis used in sets from 26" on up to 36" screen sizes.

Then, the CTC169 came along to replace the 140 chassis in around '91 and was used up until the late '90's in some sets. This chassis was used in 26" to 36" direct view sets and in projection TV's. The projection TV version was known as the PTK169. The 169 was probably the best RCA chassis of the '90's.

Of course, everyone knows about the CTC175/76/77/85/87 chassis with the on board tuner trouble. I think '92 was the first year for these and they were around until the late '90's.

The CTC197 came along in the very late '90's and was used until the early 2000's in higher end large screen sets. These chassis, along with the newer chassis, tend to have flyback failures. The 197 also had the on board tuner.

The CTC203 came along around '99 and was used up until a few years ago. The early ones had the on board tuner. Then, RCA finally got a clue and used a seperate tuner soldered to the chassis.

Oh, and there was the CTC179 from the mid '90's that was used in 32" and 36" CRT sets. The PTK179 was the big screen version. I've only seen two CRT sets with this chassis and both had arcing flybacks.
Reply With Quote