View Single Post
  #11  
Old 05-04-2008, 06:59 PM
Old1625's Avatar
Old1625 Old1625 is offline
VideoKarma Member
 
Join Date: Jan 2008
Location: Western MA
Posts: 426
Quote:
Originally Posted by peverett View Post
Are you sure the rectifier tubes are 6AX4 in the Emerson? I restored one of these and I remember them being 6AX5 or 6AV5 or some number like that, not 6AX4.

If you restore the Emerson, be sure and change all paper caps. I left an original paper capacitor in the AGC circuit that had all of 4 volts across it. Sure enough, the AGC gave trouble until I replaced it.

Another note about my restoration of the Emerson is that the CRT was dead as a doornail. I could not get any brightness, no matter how many times I tried to rejuvinate it. I had to wait until I found a parts set with the same CRT before completing the restoration.
And indeed such concern as to kine condition is paramount in my mind as I assess these sets; if such are in bad shape, and R&R of these kines is going to be prohibitively expensive or impossible, then I need to stop considering restoration operations. I can still get capacitors fairly inexpensively, but there is still no need of pouring good money into a chassis that will require first and second mortgages to simply find a working kinescope for it ....


I appreciate your concern over the extact type of rectifier tubes used, and I will make sure to ascertain that rectifier tube #, but it sure looked to my old and jaundiced eye as a good old fashioned damper tube....

And believe me I will solemnly swear to recap these bad boys.... After all; we've all been there and done that--who needs the trouble later...?

As for CRT condition I was more concerned about the 12LP4 in the other set. I might be able to find a replacement kine for the second set, but I might not try too hard; the older-style set is of more chief interest....
Reply With Quote