View Single Post
  #47  
Old 05-01-2008, 01:05 PM
Tugboat Tugboat is offline
Banned
 
Join Date: Apr 2008
Posts: 40
Just thought I'd give an update. So far the replacement board I purchased hasn't arrived. It should have shipped on 4/21, but the guy said he would send it on 4/24. According to the tracking info, he must have sent it on 4/26. It should have been sent priority, but who knows. Hopefully it will arrive today.

On another issue, my vcr has developed an playback audio problem. Lately the audio will drop to a very low and staticy (is that even a word). Using the tuner yields perfect sound, so I figured I'd check out the playback head. The head is mounted on a small circuit board with a resistor across the terminals. I got a replacement resistor and while playing a tape, I touch its leads to the existing resistor. When I did this, the sound came back. When I took it away, the sounds was still there. I stopped playback and pressed play again only find the sound problem back. This time I was poking at the two wires soldered to the head to see if there was a short in them. During playback, if I touched the leads at the solder point, the sound would crackle and get louder. When I took my finger away, the sound would go back to static. For some odd reason, I decided to short the leads momentarily with a wire and what do you know. The sound came back. Now, each time the sound goes to static, I short the leads on the head and it comes back.

I checked the head and it checks out okay, so I'm thinking it's cap on the audio board. When I short the leads, I short the bad cap. Does this sound like I'm on the right track? I have the Sams Photofact for it, so I should be able to test the board. At least the section that the PB is connected to as the audio for the tuner is fine.

Thanks!
Reply With Quote