View Single Post
  #16  
Old 04-30-2008, 08:05 PM
Bill R Bill R is offline
VideoKarma Member
 
Join Date: Oct 2004
Location: Jackson, TN
Posts: 893
Input is on pin 7. Pin 2 is however part of the video detector circuit. Sounds like you may need to replace that IC. If you inject video at pin 4 and get video, but no video when using pin 7 the IC is bad. You could just look with the scope though. The output from a vcr may be to high for a proper picture.

Bill R.
Reply With Quote