Back in the mid 1970s I was setting up some special effects for a Campus Life Haunted House. On the site (a closed race track) there were large transformers like you would find on the top of a pole or in a substation, but they were to heavy for the forklift to move and we were told we could take them apart and remove the actual transformers and just use the cans for show with neon transformers making the sparks. After we unbolted the tops we found they were filled with some kind of dark oil. So we had no idea it was pcb or what pcb was we poured out enough of it until we could see the bolts holding the transformer in the can. We rolled up our sleeves and stuck our arms up to our shoulders in this oil with ratchets in our hands to unbolt the transformer. Needless to say the 3 of us doing this were pretty much covered with this oil for about three days while we lifted out the guts with the forklift. I don't want to say what happened to the dozens of gallons of this stuff but none of us have grown third arms or any other abnormalities. I don't think. I don'think.