Resoldered most of the connections in the IF box...the coils, the IC, the transistors, and the blue-epoxy-encased mystery components. I did not resolder everything, as there's a lot of SMD components on there that I could see being easily lifted off.
Anyway, put the tuner and IF assembly back in, and buttoned at all back up. TV came to life for the first time in 3 years (

), and so far (two hours) the channels all seem to lock in just fine. Before, I'd usualy have it on for about an hour and the channels would slowly drift away...going slowly from bright, clear pic to snow.
Interesting that I really saw nothing wrong with the solder job that was already on the board...
I'm cautiously optimistic...