|
Charlie said: Meanwhile, out in my garage, i was attempting to pull the chassis out of this zenith and it looks like a nightmare! I think this time I will just turn the set on it's side and go in thru the bottom of the cabinet! All of the power control switches and lights have their leads soldered instead of using plugs, and some of the tuner is the same way. It looks like yanking this chassis would be a major pain in the ass. Thank God they put that cut-out in the bottom of the cabinet for servicing!
I am working on a RCA CTC-31 w/remote and it is such a pain to get into the chassis. For one thing, the circuitboards are mounted in such a way that it can be very difficult to get to all of the solder points on them. Also just getting under the chassis is difficult...there are no detatchable plugs to the tuner, and the way the auxiliary control panel is designed makes it hard to tip the chassis up to get under it while it is still in the cabinet.
The more I look at other brands of tube type sets the more I like the Zenith quality. Have never had the 6GH8 color sync drift, the fried flybacks, etc.
|