View Single Post
  #4  
Old 03-18-2008, 02:15 AM
dr.ido's Avatar
dr.ido dr.ido is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: SE Melbourne, Australia
Posts: 550
On closer inspection what I thought was a "made in USA" label is actually a "printed in USA" label. So there are no American parts in this set, but for some reason they decided to stick American made labels on the Japanese switches for use in an Australian set.

Some more pictures:



The CRT is an National 25VCXP22. Most of the parts have Matsushita logos on them and the boards are marked made in Japan. The heatsinks are marked made in Australia though. Perhaps that was necessary to meet some local content requirement.



The control panel is now back in. The tone control looks like an afterthought tacked on to fill the whole where a UHF tuner would normally be fitted. The tuning knob is probably from a another set, it doesn't seem to fit right. A door that would normally cover the contrast/brightness/etc controls is missing.



It does have a form of OSD. When the fine tuning knob is pushed in a yellow bar appears on screen. It expands and contracts as the fine tuning is adjusted.
Reply With Quote