View Single Post
  #113  
Old 06-15-2004, 07:23 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
The HV arcs through the glass to the yoke windings...there is apparently enough heat generated then to start melting the glass and the neck of the CRT cracks off.

Now, I wonder why there is that much excessive reserve capacity of the circuit to generate HV over 50 KV...in a tube type set, even if the plate cap of the regulator tube comes off, the HV will not go that high.
Reply With Quote