|
Let me expand on this a little...
The fact that the retrace (safety) caps on the Zenith sets caused runaway hv, and sometimes even killed the CRT, Is not a problem unique to CHroma 2's(by the way, those are probably the BEST tv EVER made, with a crt(the delta types) that seemed to last forever, with a picture that would rival, even beat a MODERN SONY).The simple fact is, ANY solid state set can have this runaway High voltage problem, even a modern one. BUT, since'74, most set have had a HEW-inspired "hold down" circuit, to prevent catastrophic failures like this.
Here is what happens: in ANY set(including some of our favorites, like the RCA ctc169) there is a capacitor in the horizontal circuit called the "retrace" or sometimes,"tuning" capacitor. it is usually somethuing like .0162/1600v., or so, but it is ALWAYS a "pf range" cap. this cap helps to "tune" the flybacks operation to the horizontal ckt. if this cap opens, the tuning of the ckt. is upset, and the high voltage can go VERY high(40kv or higher!!) But, the hold down ckt. samples the HV, and if it sees excessive HV, it will shut down the HV/set, at ONCE!! the old chromacolors (and other brands) did NOT have this feature, the idea was the cap would fail, and physically come apart. This opened the ckt. to the horizontal out, as the B+ path ran through the cap, as a safety feature, killing the horizontal voltage , and protecting the set. BUT, too often the cap did NOT physically come apart, and then, the HV would go sky high, kill the flyback, tripler, and sometimes, even the CRT.
I do not think I have replaced one of those caps since'87,when I was 19, and the last one i did, it DID physically come apart, sparing the set. I replaced it with an "ORANGE DROP", the color of the new one, and it was fixed ,IIRC.
|