View Single Post
  #103  
Old 06-13-2004, 10:23 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Yes Eric, That would be a System 3. If the set is still running it most likely has had that module changed. I remember my Uncle had to change out quite a few of those as well. It was the very early System 3's that had the problem, and the replacement module seemed to work okay and didn't fail. I don't know what caused the failure in the original ones. I had a focus tripler changed in a Chromacolor set awhile back, and was able to get the cap set from Moyers (the tripler came from them as well) For all of us with Chromacolor sets we still use, and they are still running it is most likely the cap change was done. I remember all the packs Zenith sent my Uncle, and a sticker was also included to place somewhere on the set to mark it as being repaired. I can't remember the color of the "safe" cap tho. If memory serves me, if you have an orange cap then the modification was done. If you have the white cap, then I would not run the set untill the repair was made. Anyway... Zenith was aggressive in making sure those sets were modified. Those sets still have the best damn picture. So good in fact it's eerie! Pretty remarkable when you consider the Chromacolor 2 is now 30 years old and the System 3 is now going on 25!
Reply With Quote