|
This set had a weird circuit breaker. The original had three solder lugs. Two of the lugs connected to the circuit breaker which is in the AC line. There is a .9 ohm resistor inside the CB that connects between the third lug and the metal case (which is chassis ground). The .9 ohm resistor is in the cathode circuit of the horizontal output tube. There is also a 100 uf cathode bypass cap for the HOT. My friend was telling me that he's seen several of these cathode bypass caps blow up due to the .9 ohm resistor opening inside the CB.
Anyway, I replaced the CB with a two terminal device and used a seperate resistor to replace the .9 ohm resistor inside the original CB. I now have sound but no HV. I've determined that the HOT (6KG6A) is dead. I'll also change the 6GH8A horizontal oscillator while I'm at it. I hope I can find a HOT in my stash. It seems like NOS sweep tubes become more expensive every day. But, I'll order one if I have to. I must amaze my babysitter and get this set going.
|