Quote:
Originally Posted by radiotvnut
I've also seen my share of TV's with foil wrapped around the fuse.
|
Hmmm. I wonder how many house fires have been started by faulty TVs, radios, etc. in which the AC line fuses or circuit breakers were bypassed by foolish users.

This was very common years ago, when houses had electric service panels with screw-in fuses rather than circuit breakers; when a fuse would blow and a replacement was not readily available, the homeowner would simply put a copper penny behind the open fuse, then screw the fuse back into the box. This may have restored the circuit and got the lights/outlets/appliances going again, but since there was no fuse in the fusebox (the penny effectively bypassed the open fuse), the circuit the fuse was supposed to protect was put at immediate risk of being dangerously overloaded. This often led to house fires which started behind walls, when the insulation would burn off the overloaded wiring.
Today's electric service panels, in which incorruptible circuit breakers rather than fuses are used, have all but completely eliminated the fire hazard I mentioned above. When a circuit breaker flips "off" due to an overload, there is no way to bypass it as the breaker's terminals are hidden deep inside the box; the
only thing a homeowner can do is flip the breaker back to "on", after unplugging the defective appliance or correcting any overload condition, of course.