View Single Post
  #19  
Old 02-11-2008, 03:46 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Its Done!

Between work, snow and life in general I finally got the time to work on some sets this weekend, one of which is the '75 GE from ebay. I took the tuner apart and cleaned and lubed each contact individually so there is no "bad channel" when all the others work fine. I hate when people blindly spray cleaner into a tuner getting everything but the contacts, I see a lot of that, also causes drifting. Fixed the fine tuning, the spring was a little strong for the unit and the assembly was a little stuck. Cleaned up nice and all
I had to do was stretch the spring slightly, works flawlessly now on all channels. I also replaced the broken VHF antennas, This was a pain! Literally, I accidentally stabbed myself with the broken antenna when removing it. I had to make three trips to the store to find the one that would work! The GE replacements and the "universal" ones would not fit, the ball was too small. Oddly, the ones that worked and the last ones I tried were for a Sears TV!, or the ones for japanese made sets! Anyways, they are replaced and look nice. This set has now ben run for over 8 hours now without one flinch, snowy spot, buzzing sound or problem whatsoever. I've noticed that any project of mine isn't done until I am cussing and/or bleeding! The best projects have all ended this way!!LOL! My other project consisted of a '60 Zenith HI-FI table radio{off subject,sorry!} I found sitting in the aisle-way of an antique store I went to with the family this weekend. It is fun to go back to the basics once in a while, AND this is one of my favorite Zenith radio models, I HAD to save it!{ I also noticed that even radios are getting real hard to find} I fixed the broken dial string{ reused the copper rings for originality, see pic} and detail cleaned the whole thing. The only thing wrong with it now is a water stain on the top, I'll probably just have to live with that. Years ago I would have probably passed on it because of that stain. Now I take 'em no matter what!
Attached Images
File Type: jpg 303578854.jpg (57.7 KB, 10 views)
File Type: jpg 303578864.jpg (60.9 KB, 8 views)
File Type: jpg 303559136.jpg (70.8 KB, 9 views)
File Type: jpg 303559141.jpg (75.6 KB, 10 views)
File Type: jpg 303578839.jpg (57.7 KB, 7 views)
File Type: jpg 303578833.jpg (61.2 KB, 6 views)
File Type: jpg 303559176.jpg (62.6 KB, 8 views)
File Type: jpg 303559183.jpg (64.0 KB, 5 views)
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26

Last edited by zenithfan1; 02-13-2008 at 10:14 AM. Reason: added pics and additional comment
Reply With Quote