View Single Post
  #3  
Old 02-09-2008, 04:41 PM
johnfull johnfull is offline
AK Member
 
Join Date: Jan 2008
Posts: 15
Thanks, Andy.
It does, indeed, still use the pots for some
functions. The Bias and Drives and Pin Cushion
and Horizontal Centering and Vert and Horiz
size are still like the good old days.
I think I might experiment with cranking the
pot that's there first to see how it looks before
going further. I'm not really a technician, but I
know some basics. The idea of having additive
resistance is a good one. I hadn't thought of
what would happen in that split second when
there is no signal at all between the two values.
I guess it could fry something to concentrate the
beam at full bore on a single raster line.
The problem I have with the pots is that they
seem frail. After so many years, the Bias and
Drive controls have gotten non-linear. It takes a
lot of patience and even more luck to get an
acceptable setting for those. I would hate to think
that the vertical size is just as frail, but I bet it is.
Thanks again!
Reply With Quote