Quote:
Originally Posted by radiotvnut
Check for a shorted horizontal output transistor. Also check the two transistors mounted on heat sinks in the power supply for shorts. If they are shorted, there will be a small round white resistor less than 1 ohm that will be open. Also, resolder the connections on the horizontal drive transformer. The loose connections are what takes out the HOT and in turn blows up the power supply transistors.
|
My suggestion exactly. A note on the resistor: It IS THE B+ FUSE. You must replace it with an exact equivalent, or the set will blow to oblivion if the short that caused it isn't fixed. That resistor is R607, near the edge of the board where the 2 heatsink-mounted regulators transistors are (2SC4834MN). Technically, you should replace the thermistors too; VDR601,602, & 603. However, many people don't.
Charles