Quote:
Originally Posted by RetroHacker
There's only what, like three dozen of us wordwide.
|
Many more than that. If you attend the annual convention at the Early Television Convention in Ohio, you can meet collectors from around the United States and as far away as Europe.
http://www.earlytelevision.org/
I agree that a TV is not the ideal first project. Starting with a simple 5-tube radio would be a better introduction -- you can make your beginner's mistakes on that.
The best TV repair books are out of print, but if you want to cut your teeth by restoring a simple radio, you could get a beginning radio book such as "Antique Radio Restoration Guide," by Johnson. A lot of the basic information, such as identifying components, needed tools & test gear, etc., is the same for TVs and radios.
One caveat about reading old repair books: restoring a 50-year old TV is different than what a repairman faced in repairing a 2- or 5-year old TV. After decades, the electrolytic and paper capacitors have deteriorated, so probably all of them need to be replaced. Controls may be corroded or frozen. And so on.
In the old days, a repairman could usually diagnose a problem quickly and cure it by popping in a new tube, replacing a burned resistor, etc. The rest of the TV was still fresh and didn't need any attention.
Nowadays, the situation is reversed. Every 50-year old TV has a multitude of little issues, caused by aging and perhaps decades of use, which you need to deal with before it will be safe and reliable to play. That why I call it "restoration" rather than "repair."
It's like finding a 50-year old car in a barn. You can't expect to just top off the gas tank and hop in for a cross-country drive :-)
Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html