View Single Post
  #26  
Old 01-12-2008, 11:32 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
Thanks, nice Zenith roundie, I have 2 early color sets a 1963 Philco combo, and a CTC-10 w/ remote, I have yet to start working on the 10. Southern CA seems to be completely lacking of Zenith roundies, in 6 years of collecting sets down here I haven't seen a single one.

That is a 47pf cap in the front of the yoke, but there's a resistor over on the left side, according to my schematic the yoke should have 2 caps in it and no resistors, I'll take a good look at it and see how it's wired then post up a schematic of it vs. the one that's supposed to be in there.

Any resistance tests I make show nothing wrong with the set. I ordered .02mfd 1.6kv replacements for those .018mfd 1kv caps, (I figured the .002 mfd difference wouldn't cause any problems) I guess something could have happened to them when I turned it on with the wrong fly in there.
Reply With Quote