View Single Post
  #9  
Old 01-07-2008, 02:12 PM
andy andy is offline
VideoKarma Member
 
Join Date: Jul 2002
Posts: 4,004
You don't want to use zeners for this. Use a pair of small, low power diodes. Just about anything should work as they won't see much voltage, or current (do you have any junk electronics around). High power diodes might be too slow, or have too much capacitance for this application and zeners certainly won't work.

How do the original diodes test? The few times I've seen this problem, one or both of the diodes failed a simple resistance test with a VOM.
Reply With Quote