Quote:
Originally Posted by Jeffhs
BTW, the comment regarding the volume limiters for the TV and AM/FM radio in this TV has me wondering. Why on earth would the TV's volume limiter be set for normal listening, while the limiter for the radio was set at maximum?
|
Looking at it from a systems engineering point of view, I'd almost would think that the FM radio IF and detector could be the same one used for the TV sound (which is also an FM signal). The FM radio would then need its local oscillator to be 4.5Mhz higher, instead of 10.7MHz higher, to get it to an IF of 4.5MHz. Could be done. However, TV sound deviation is less than that used for FM broadcast radio. Thus the TV sound will come out at a lower volume than the FM radio stations would.
Another consideration is that it would be cheaper (at the low manufacturing volumes these sets would be done at) to just grab AM/FM radio circuit boards, the ones intended for clock radios, and just stuff them inside existing design TV sets. This is the usual reason for otherwise stupid design decisions one finds inside TV sets.