|
I had AGC troubles with a 1977 vintage Portacolor. The symptoms were intermittant. What would happen is that the picture and sound would go away leaving just a raster. What I found was that the design of this particular Portacolor had controls with the boost voltage (700 volts if I remember correctly) and the AGC controls in the same assembly. Over time, conductive tracts had built up, allowing the boost voltage to leak into the AGC area.
I fixed the problem by very carefully disassembling and cleaning the control assembly. You must be very careful in bending the metal tabs holding the assembly together or they will break. The set still works fine(at least as good as Portacolor ever did) at present.
As this has been a few years back, I do not remember the voltages that were showing up when the problem occurred.
|