|
Well, I checked the 6JE6 yesterday, upon startup, it's reading 208ma. After 10 minutt will drop all the way to 145ma. As it slowly drops down, crt starts to lose focus and a little shrinking on the left side of raster at 184ma. It will start geting wonky and horiz will start to flutter after it's been on for a while. Now whats interesting, it will drop quick if I turn up the brightness, but it can stabalize and eventually it will come back up and stay around 190ma and the raster looks good, although the horiz flutters a bit. Upon startup I have to turn the horiz hold all the way over and back to get a raster or it's way off. Haven't checked line voltage at the trans taps yet. Im stumped though, why would the b+ come back up after it drops way down? When I check this and attach my meter and disconnect the lead to ground and run my meter in series, this is checking B+ right?
Also I forgot to add that the vertical takes a bit to stabilize too, and is touchy. The horiz when I say is wonky, it has a tenency to flutter a bit back and forth like im barely turning the knob.
__________________
Honey, turn on the tv.. I'm cold!
Last edited by freakaftr8; 12-13-2007 at 01:12 PM.
Reason: Forgot to add something in
|