|
There's a 1/2-watt resistor, and a small electrolytic (sorry, can't remember the value of either,) that are mounted on the reverse side of the flip-down chassis, on behind the horizontal oscillator (9-90) module, and below the tripler. I wish I could be more specific, but it's been years. That resistor will be burnt and probably will crack in half when you touch it. If that's the case, the small electrolytic right next to it is leaky and caused the resistor to overheat. That's a 98% good guess at your foldover/shrink problem, IF it was intermittent at first.
As far as no raster, but has HV, check your vertical output fuse and the 9-92 or 9-147 vertical module. The fuse, if the G chassis has it, will be right next to the module. There's a beam killer circuit that stops the raster on those sets if the vertical collapses.
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
|