View Single Post
  #34  
Old 12-05-2007, 12:49 AM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
I have a CyberHome CH-DVD300 DVD player (Christmas gift in 2005) that still works well. The only thing I don't like about it is that it only works with its own remote. Can't get it to work at all with my AllForOne universal, but then again there was a warning on the company's web site when the player was new that these units will not work with any kind of universal remote. I don't know if it will work, either, with the Philips learning remote, but I can't afford something like that right now so I may never know. My next DVD player may well be a combination VHS/DVD dubbing deck, or else an established brand of standalone DVD player such as Toshiba. The combo dubbing decks (off brands like Emerson, et al.) are selling for fairly cheap prices now, so I'll be better off getting an entirely new unit than having my current DVD player repaired when it eventually goes belly up. Like everything else these days, it will probably, even likely cost more to have mine repaired than it would to get a complete new system with a factory warranty. I ran into just this kind of problem when the cassette decks went bad in my Aiwa bookshelf stereo. Took it to a local TV repair shop, only to find out the repairs would probably cost close to what I paid for the unit when it was new, then seven years earlier. I finally gave up and bought a used Radio Shack stereo cassette deck online (John Kendall's Vintage Electronics, www.vintage-electronics.com) for $20, not including shipping. I connected this late-1970s vintage deck to the MD input of my stereo system, and it worked. I now have a cassette deck in my stereo once again, for a fraction of what it would have cost me to have the decks in the system repaired. I did this as well with a Zenith stereo system I had in the '80s. The single cassette player went bad after perhaps 15 years of hard use, so I found an older cassette deck on the curb in my old neighborhood and connected the deck to the aux input. Again, it worked, and saved me money on repair charges. The RS deck doesn't have auto-reverse or full-logic as did the decks built into my stereo, but the older deck works well with the system, which is really all that matters to me.

Too many older stereo systems, TV/VCR combos, etc. are put out for the trash every week because their largely non-technical owners do not think of using external devices to replace the built-in ones when the latter eventually wear out (but the rest of the unit still has plenty of life left in it). If more people did this, we would see far fewer newer units on curbs and eventually in landfills after only a few years.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote