|
That SK3306 tripler is an RCA replacement for the original. Here's another idea. Disconnect the HV from the CRT and make sure the HV lead from the tripler is firmly connected to the suction cup HV connector. I seem to remember that some of those SK triplers I used to buy in the '90's didn't have the HV connector attached. A new connector was either in the box or I would have to use the original. It may be possible that when your repairman moved the HV lead around, it may have broken loose inside the suction cup HV connector. Make sure you discharge the CRT before removing the HV connector. Just take a clip lead with one end clipped to the CRT ground strap and the other end clipped to a long flat blade screwdriver. Now, hold the screwdriver by it's handle and work the end under the suction cup and make contact with the HV connecion. You may hear a loud "snap" as it discharges and you should repeat the procedure several times to make sure it's fully discharged.
|