Quote:
Originally Posted by radiotvnut
The tripler is easy to spot. Just follow the HV lead from the CRT back down a rectangular block. That block will be the tripler. I believe it has four leads soldered to it. And, I believe crosses to an NTE523A or ECG523A.
|
you would be correct. Actually before i even checked this thread i pulled the set apart and kinda used deductive reasoning to find what I assumed to be the tripler, and then googled the part number (sk3306) to find it was indeed the tripler. yes its a big grey box with 4 leads. it looks to be in good condition (ie not cracked). Im going to un-coil the HV lead that the other guy kinda looped up a few times and zip tied to the side of the tripler, ive looked over the entire thing for evidence of arching, unplugged the CRT socket, didnt really see anything that stood out, but ill keep looking. I did find a few broken groung lug solder joints on the board where the metal of the chassis meets, and im going to re-flow the solder there before i power it up. Other than that i didnt see anything on the HV lead, and the cup is firmly attatched to the CRT.