View Single Post
  #88  
Old 04-25-2004, 12:30 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Re: A SPACE COMMAND 600 CONSOLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Quote:
Originally posted by drh4683
Its pretty amusing to see the tuner in action and hearing all the noise it makes!
Is the UHF tuner in the Zenith Ultramatic system really that noisy? I know the detented VHF tuner can make a lot of racket when its drum turns, but there's nothing to make much noise in a UHF tuner of that vintage, as they were all continuous tuning back then. The only thing I can come up with to explain all that noise is there must have been a detented drum or some other indexing system used in the Ultramatic to select up to six preset UHF stations (U1-U6).

The same system (without the motor drive) was used in Zenith TVs from about the late '70s or so until the late '80s, IIRC. I had a Zenith portable of early 1980s vintage with the one-knob electronic tuning system, and liked it a lot. Wish I would have held on to it, as it still worked, and well, at the time (unfortunately, it went out for the trash when I moved four years ago).

In fact, thinking about how that system was set up (I saw the service notes for the Ultramatic in a Zenith TV service manual some years ago), it makes sense to me now that the thing would make the same clunk-clunk noise when it was operating as would a detented VHF tuner. Even at that, however, I can't imagine the UHF tuner making as much noise as you say. Still, there's the matter of the UHF knob spinning like mad when the system is changing channels. If the UHF tuner detents through its six channel positions, wouldn't the UHF selector move just as slowly as the drive unit did, and in measured steps?

Your set looks very nice from an appearance standpoint as well. I recently saw a picture of the same set on a web site (tvhistory.tv) which also showed Zenith's other 1969 color TVs. I see Zenith still has two consoles in its lineup today, a 25" and a 27", although the chassis in these sets are probably made by Gold Star and are as unreliable as today's Zenith table models.

I hate saying that as, like yourself, I like Zenith TVs and other early entertainment gear from when the company was still based in Chicago, but unfortunately it's the truth, unless the console chassis are of better quality than the smaller sets (which I doubt).
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.

Last edited by Jeffhs; 04-25-2004 at 12:33 PM.
Reply With Quote