View Single Post
  #22  
Old 11-27-2007, 01:16 AM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,814
Color sets always had *some* DC restoration. It was often deliberately made to be 85% or so. The argument at the time was that it reduced the visibility of the variations in the transmissions. About the time the networks got things under control, cable came along and generally screwed up everything possible in terms of differences between channels.

Another unspoken reason for lack of DC restoration is that it reduces beam currrent on scenes with lots of bright areas - so, you didn't have to be so precise in making sure the customer couldn't overload the HV section if he cranked the contrast to max.

Also, before the days of video processing ICs, where the "contrast" (actually now a "picture" control) could be controlled by DC, the beam current limiter had to work by reducing the black level- so, if the cutomer pushed the "contrast" too high, when an extra briight scene came along, the black level would be deliberately pulled down to limt the beam current. This could be for two reasons: protect the HV/horizontal sweep and/or limit Xrays.

Once the picture drive level could be controlled by a DC voltage, it could be used ot limit beam current, and there was no excuse for not having 100% DC restoration. This was the last gasp for B&W chassis, however, and the philosophy of less than full restoration hadn't died yet.

Studio monitors, of course, always had full DC restoration, but generally they made lousy TV's for other reasons, like maybe they expected clean signals and wouldn't sync worth a damn on noisy, ghosty over-the-air signals.
Reply With Quote