Quote:
Originally Posted by andy
That would be it. You disconnect the wires from the divider because they are glued to the CRTs. Usually, you push and twist the wires a half turn to unlock them.
There's a lot of cigarette tar in that set. Be sure to clean the lenses, mirror, and inside of the screen if you want a good picture!
|
Yes, definitely.
EDIT: The splitter itself was easy to remove (1 screw) but I'm having trouble removing the leads on top. The rubber boots around the wires are just pulling off. I don't want to push something too hard, for fear of crapping something up.
Let me go try again.
Here's a photo of the splitter with the wire boots pulled up. I can't really tell how the wires are attached to the unit.
http://img152.imageshack.us/img152/6...ivider2qc7.jpg