|
Have you got a model or chassis number. Should be on a piece of paper located on the rear cover. I'm not familiar with RCA's newer bigscreens; but, their direct view sets of this era are known for having bad flyback's. You'll probably have to obtain service information on this set to determine what value the resistor is. Then, you'll have to find out what drew too much current and burned the resistor. You may try tracing the foil on the underside of the board to see what the resistor connects to. You may possibly have some type of solid state device (IC, transistor, diode, etc.) that has shorted. And, it could have very well have been the flyback that went bad. Like I said, they are high failure parts in the direct view sets.
|