View Single Post
  #4  
Old 11-16-2007, 03:07 AM
YamahaFreak's Avatar
YamahaFreak YamahaFreak is offline
<-- CSXT 6038, EMD GP40-2
 
Join Date: Dec 2005
Location: TOO sunny Florida, USA
Posts: 580
A minor victory

I was actually able to move the set inside(yes, it's been sitting in the backyard under a tarp for the last three days!) This allowed me to take some MUCH better photos. Just to make doubly sure the problem is what I think it is, I got out my DMM and tested the fusible resistor. It is indeed open. I am wondering if I could get away with just replacing the resistor, or if it would just blow up again?

Worth noting IMO is the way Sony designed this set for simple and easy repairs. All the boards are letter-coded and all instructions for service procedures, carrying the chassis, service positions, etc. are all listed inside. I like it, especially since this is my first serious repair!

Behold, better pictures!

The first photo was taken from the left side of the set, and marks key components:

http://img340.imageshack.us/img340/3461/1020779fx5.jpg

The second was taken from the rear and is larger and unmarked to show detail:

http://img211.imageshack.us/img211/7859/1020780ja2.jpg

Again, I apologize for repetition of posts.
__________________
Sony Trinitron Fan
Reply With Quote