Thanks for the info. Here's somemore snapshots of the STK convergence chips.
Top view:
Angled side view:
Close side view with STK number visible:
I looked the part number up, and the IC is cheap enough, and the resistors and caps shouldn't be too hard to replace. The only problem I forsee is
getting under the board to desolder them.
The board the IC's are on is connected to the flyback. I have never worked with a flyback like this before, truth be told I have never discharged a flyback. I usually flip the TV upside down to get under the board. Can't do that with this TV. I'm at a loss at how to proceed.