Thread: Cheap HD
View Single Post
  #17  
Old 11-07-2007, 04:43 PM
OvenMaster's Avatar
OvenMaster OvenMaster is offline
DTV blows
 
Join Date: Jan 2005
Location: Red Sox Nation
Posts: 565
I just noticed something.

I'm looking at the owner's manual for Eric's tuner box. On the rear panel are some plain old standard definition Video Out RCA jacks, and a pair of L+R Audio Output jacks. The manual says "Use this output for conventional TV sets that do not have S-video or component video inputs. This output port supports the only SD output.'

So, my two questions are:

1. Can these outputs be fed to the Line Input jacks on my conventional VCR and then enable me to use the VCR's NTSC channel 4 RF modulated output?

2. If I can feed these signals to the VCR's Line In successfully, would it be possible to record the picture and audio onto standard video tape and replay the tape on any NTSC VCR?

If this worked, not only would I be able to use the VCR as my RF modulator for my present standard-def TV, but I'd be able to make analog recordings of any broadcast.

Thoughts?

Tom
__________________
Tom
Reply With Quote