Quote:
Originally Posted by peverett
Jeffhs you mention 1950s Zenith radios. One problem that I (and is very common according to my radio collector friends) have with these is IF capacitor corrosion, causing leakover. Starting about 1950, Zenith and some others went to the small IF cans with built in silver plated capacitors. After 40+ years, the silver has tarnished causing the leakover. This results in static and loss of signal. Symptoms of this is a positive grid voltage on the IF amplifier tube and incorrect voltages on the detector stages. Have you seen this issue? One Zenith collector even published a fix for this. I personally have several 1950s Zenith radios and love the sound of the FM ones when they are working correctly.
Radios made before 1950 with the large IF cans and adjustible mica caps do not have this issue.
|
No, I was not aware of that particular problem (leakover, caused by tarnished silver-plated caps) with Zenith radios of the 1950s, although, to be perfectly honest with you, I've been away from the service aspect of electronics since I gave up my workshop in my former home almost eight years ago. Perhaps someone a bit more familiar with these radios who still has a workshop and/or access to test gear can give you a better answer to your question. (The only test gear I have here in my apartment is a DVM.)
I agree with you, however, as to the sound of the old Zenith radios. I have two Zenith AM/FM sets, a K731 and a C845, which, even after 40+ years, still sound absolutely great on both bands, but the 845 has somewhat better sound than the 731 due to the 845's 8-inch speaker and a true tone control that does more than simply cut the high frequencies. The C845 is also hotter than a firecracker when it comes to RF sensitivity, as it has a 6BJ6 RF amplifier that operates on both AM and FM--mine will consistently bring in stations from 80 miles away, just using its built-in antenna; I hate to think what a mess my radio dial would be if I had an outdoor antenna on this thing, as I'd have FM stations coming in like gangbusters from perhaps 100 miles away. As it is with the built-in antenna, the set gets all the Cleveland stations and, when the FM band opens up in the summer, I get stations from Detroit, Toledo, Ohio, and southwestern Ontario, Canada as well. But that doesn't surprise me. I live within a mile of the south shore of Lake Erie, so I consistently receive Detroit/Toledo/SW Ontario stations on all my radios--even my 1980-vintage Zenith R70 transistor portable. That doesn't surprise me either. That little portable has four IF stages and an RF stage on FM and two ceramic filters, one for AM, the other for FM. The R-70 has a circuit board (Zenith apparently had broken with tradition by 1980, as this was the year it started building its radios and even TVs [!] on PC boards rather than steel chassis and handwiring), but it still works and sounds excellent, even with a 4-inch speaker.
The R-70 was, I'm sorry to say, one of the last really good transistor portables made under the Zenith brand before Zenith got out of the radio business, but by the eighties even these radios, not to mention Zenith televisions, were not being manufactured in this country anymore. There is a molded-in notice on the back of my R-70 that states this fact all too clearly: "Manufactured in Korea to the standards and specifications of Zenith Radio Corp., Chicago, U.S.A." My Zenith H480W clock radio (AM/FM/FM-stereo) bears the same notice, only the country of origin is Taiwan. I had a Zenith stereo system in the '80s that was also manufactured in Korea to Zenith's specs and standards (again, there was a notice to that effect on the back cover).
Believe it or not, both radios (C-845 and K731) even have their original filter caps and selenium rectifiers. I can't believe that seleniums can last that long without shorting (both radios were made in the 1960s). I don't think much about it, but a radio with 47-year-old seleniums is on borrowed time; there is no telling when the other shoe will drop, meaning the rectifier shorts and gives off that telltale rotten eggs smell. When I was a kid, we had a Crosley Super V 21" TV, 1950s vintage, with selenium rectifiers; the rectifiers were still good when we finally got rid of the set in the '70s. I mention all this because I remember reading somewhere (probably here on AK in the television forums) that seleniums will short on their own after a few years, for no apparent reason.
Again, I'm sorry I couldn't have been of more help with your Zenith radio problem, but as I said, I've been away from servicing too long. I could measure voltages on tubes with my DVM (as long as the voltages don't exceed 600 volts, the limit of the meter--my DVM is a cheap foreign import under the name of Velleman) and so on, I can read a schematic as well, but I'm really in no position to do in-depth service work on electronics anymore. As I mentioned earlier, perhaps someone better equipped than I may be able to advise you in detail as to the leakover problem in early (1950s) Zenith radios.
What exactly is "leakover", anyway? I'm guessing it has something to do with signal loss, but that's all it is--a guess.
I learn something new every time I read the posts in these forums (I am a member of AK and am always and forever lurking in the forums, occasionally posting if I feel I can be of assistance or need help with a sticky problem of my own), and tonight, when I read your post, was no exception.