View Single Post
  #4  
Old 11-01-2007, 04:42 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Smile

I have an RCA set very similar to yours. The circuit boards on mine were solder mounted via bent metal tabs of the chassis in such a way as to make it very difficult to get at the solder traces of the boards. So I cheated and just clipped the wax cap leads with enough above board lead length so I could "J hook" the new cap leads to them and solder the Js. It worked. I didn't try to unsolder the circuit board mounting tabs, as there's still a ton of wires still connecting the board to elsewhere in the set anyway.
Reply With Quote