View Single Post
  #34  
Old 10-29-2007, 12:18 AM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Is your picture going black or just blank white raster?
If it's going black you need to check the horizontal drive transformer as suggested earlier, also solder the connections on the flyback and the board on the back of the CRT.

These sets were notorius for bad solder joints.
My 1990 XBR had the horizontal issue when it was 2 years old, it took me three tries to finally find the bad connection but it's still working to this day.
Reply With Quote