Thread: Burn-in
View Single Post
  #6  
Old 10-14-2007, 08:56 PM
old_tv_nut's Avatar
old_tv_nut old_tv_nut is offline
See yourself on Color TV!
 
Join Date: Jul 2004
Location: Rancho Sahuarita
Posts: 7,815
Phosphor burn-in susceptibility depends on both the composition and the physical processing of the phosphor. It doesn't necessarily depend on how cheap it was, but maybe on whether burn resistance was traded for other desirable characteristics.

One project I worked on used a flying spot tube. The first tubes we had could be ruined if the vertical sweep collapsed. Later on, we got some samples from Tektronix using some sort of thin film phosphor. They had studied the problem extensively due to the likelihood of burning oscilloscope tubes. Probably every tube in every scope ever put into service had a burn spot somewhere. This new Tek tube could sit with the vertical sweep collapsed for an extended time, and it would creat the barest shadow in the picture when sweep was restored.

For any given phosphor formulation, the amount of burn seems to be proportional to total charge absorbed, so turning down the drive definitely helps.
Reply With Quote