|
Hi Eric, yes I changed all of the multi-section cans on mu chassis. As for the test crt I have known that they were once available when shops still repaired what we now consider "vintage". Thanks for the link. For those of us who do not have one and want to check some voltages a couple of us are wondering what the right way would be to aproach doing this on a chassis that has been separated from the crt and tuner. I know jumper wires are one way. However it would be a pain to extend the yoke wires to a remote location.
Obviously you wouldnt want 2nd anode voltage flopping arond loke a Cobra snake. I have heard to remove the horizontal oscillator tube to disable HV and avoid some kind of damage to the flyback. Does everything have to be hooked up to check power supply, sound, and vertical circuit voltages?
To my friend Murray I am sending you a PM and for the thread no my set does not have any selenium rectifiers. Transformer and tube all the way here..
|