|
Zenith space command
I have a schematic for the space command remote chassis .
Does yours have 3 6AU6s and 1 6AL5 1 6CM7 ? If so Ive got the info for it.
these were in canadian models in 1958-59
I would say it would be safe if you pulled the horizontal output the flyback will be protected and there would be no high voltage .
the hum , what cycle is it ? is it 60 cycle or is it different ?
that's good that your set has the same vertical circuit as my schematics
it's probably the same circuit . you might be right about the remote chassis
causing problems and I have the info for the chassis plug and the socket wiring into the tv chassis .
Does you socket have 8 pins all around then the 9th is more towards the center ?
I can get you copies of this if it's the one that fits your set .
Any susgestions or comments please , if disconnecting the horizontal output tube would be allright ?
|