Ay, Que tal Javier:
Your mystery schematic seems to be Sams 1396-1…and it is not that Sams 1267 folder number that you were trying to reference to …a chroma console…(but I’ll just guess that you might go for that type of an upgrade !) .
The units Vert hold pot sticks out at the bottom center rear of the cabinet, while the Horizontal hold is further over to the right and is a moving core inside of a coil /variable inductance adjustment ..not a pot. If the only thing you are getting is a white line across the picture tube hopefully it is just the vert pot that is broken/cracked/kaput. None of your provided I.D. numbers were valid on the actual chassis or model number for any Admiral that I am familiar with.. The units Vert hold pot is a 1 meg unit with a PROTRUDING plastic shaft (read as fragile)and the controls on either side of it are Vert Ht pot at 5 meg and the Vert Lin pot at 500k..Somehow I just feel that they might be in a triple cluster all enclosed within one housing as made by Centralab/CTS and that were so popular back at that time. So that would call for a replacement of the Vert hold pot/section with a linear 1 meg single pot with the mechanical mounting/interfacing aspect left up to your able and sheer ingenuity. I made a copy of the first and last page of the Admirals schematic. I can get it to you if you will contact me at the E-mail addee at the end and we can avoid any specifically irrelated TV “clutter” off this forum . Y parece que su pais es Mejico , en vez de los ‘Stados del Norte.
73’s de Edd
[email protected].
