View Single Post
  #66  
Old 09-27-2007, 08:08 PM
Radiophile2001's Avatar
Radiophile2001 Radiophile2001 is offline
VideoKarma Member
 
Join Date: Jun 2006
Location: Montclair, VA
Posts: 105
Doug,

I agree with you.......probably the only people in the world that know how to fix these sets (with confidence) are present in AK. It would be tough to find a shop to do it reasonably or at all.

Now as to the gear, I have nothing but soldering irons and solder. Don't know how to read a schematic.

It's got to be the chassis....the tuner was fine all along and it all seemed to center around that one HO 12HG7 tube. That's where, for a while, I could get the set to work fine if I moved that tube just right.
However, I do also remember there was a brief period of about a half day (just as it started its downhill trend) I would change VHF channels and the screen would go totally black between channels--like instantaneously and briefly as I was turning the knob.

Both the old and new 12HG7 tubes I have light up, but no luck beyond that.
I had soldered the ground connections on the chassis back a while too....not sure if that helped or hurt.

Would love to just pull the chassis and ship it to you.... (But not via Craters & Freighters this time!)
Reply With Quote