|
Now I disconnected the black wire going into the tripler. I positioned the wire in the air away from metal parts. When I plug in the set it immediately blows the breaker again.
Someone had already scraped away the black silicone material that was supposed to be around the black wire terminal scraped away.
When diagnosing the set earlier, I had the SpaceCommand module disconnected. I figure this was preventing any AC from flowing into the main transformer primary. The breaker does not pop when the SpaceCommand module is disconnected.
Maybe the SpaceCommand can fail causing a short across the AC line? But now it pops as soon as I plug it in.
|