View Single Post
  #2  
Old 09-25-2007, 03:06 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by bgadow View Post
When I met my wife she was boarding with an older lady who I remember would always be sitting in the living room watching Lawrence Welk. She had a 90s Zenith console; the major defect it had was a total lack of pincushion correction. There may have also been convergence issues. The other set I have experience with belongs to the sweet old lady next door-a later 90s 20" Zenith. The picture is the worst I've seen on any late model set. I've tinkered with it to try and improve things but there really isn't much you can do. Totally washed out and muddy. She really doesn't seem to mind, though. Funny, she has a nice 27" GE (RCA) in the front room which she never uses, and it works fine. And in the back is a 19" GE (pre-RCA) which is great as well. But she likes the remote on this Zenith, and is used to it, so that's what she watches!
Some people just don't care what their TV picture looks like, as long as it's there. I saw a 19" Portland TV about 20 years ago with about the worst color picture I have ever seen in my life (colors were all wrong, and I thought I saw the tint control set fully CCW or CW), but the family that owned it didn't seem to care. When color TV was still fairly new in the '60s, technicians would often go on service calls for TV pictures with no color only to find that the fine-tuning control was set incorrectly. A simple twist of the wrist changed the black-and-white picture to full color, often to the amazement of the set owner. Some people watched color shows in b&w on their fantastically expensive (in those days) color TVs for years, unaware that a simple fine-tuning adjustment would restore the color in the blink of an eye.

Today's color sets, however, are almost foolproof and almost always work right out of the shipping box (no setup, convergence, etc. required--just connect the antenna or cable, plug it in, turn it on, do a channel scan and you're good to go). My own RCA CTC-185, for example, is fully automatic as far as video processing is concerned, thanks to the jungle IC; because of this (and the set's automatic fine tuning system, which doesn't even have a menu option on the set's main control menu to enable or disable it, is excellent as well), this set is set-and-forget television at its best, IMHO. I don't think I've had to adjust the on-screen picture controls more than once or twice, if that often, in the nearly eight years I've owned the TV. I don't know if my set has automatic color tracking or not, but even if it doesn't the picture is still very good, even for a set almost eight years old that is used quite a bit (I watch TV a lot, both cable and DVD/VHS).

BTW, hmmm. It's interesting to me why your neighbor prefers the royally messed-up picture on her Zenith TV to the most likely better picture she must get on her other sets. It seems to me, from your description of the picture, as if the CRT in the Zenith set is about shot. How long has your neighbor had this TV, and how much does she use it? This sounds like another case of a junk Zenith CRT; the tubes in their 1990s-vintage sets historically don't last more than a year or two, three at the outside. The fact that the tube in your neighbor's TV makes any kind of picture at all seems amazing to me if the set is more than a couple of years old. Given the short lifespan of most Zenith CRTs these days, I'd guess the tube is going to go West any day now.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote