|
In late 1939, with the likelihood of full scale war in Europe a major concern, the British Royal Air Force was looking seriously at methods of quickly increasing its fighter strength. In April 1940, the British Air Purchasing Commission approached North American Aviation with the intent of having them build P-40's for the RAF. Since the P-40 design went back to 1933, James H. "Dutch" Kendelberger, the president of North American offered to build an entirely new advanced fighter using the same Allison V-1710-39 engine, used on the P-40. It was said that "Dutch" got his inspiration for the P-51 after a 1938 tour of aircraft industries in Great Britain and Germany.1 North American's only previous fighter experience was with the NA-50A, but Dutch collaborated with J.L. "Lee" Atwood 2 to formulate an outline for the project. The British agreed on the new type, NA-73X, only on the stipulation that a prototype be on hand within 120 days. North American designers Raymond Rice and Edgar Schmued, the latter had worked for Fokker and Messerschmitt in 1925,3 immediately set about meeting the requirements. A prototype was finished in 117 days minus the engine. Wheels also had to be borrowed from an AT-6 trainer. Six weeks later, and after several modifications, the aircraft took to the air October 26, 1940.4
With Vance Breese at the controls, who was one of the most famous test pilots in his day, the XP-51 reached 382 mph, exceeding the P-40's top speed by 25 mph.5 The P-51 was an immediate success and it even outperformed the Spitfire.6 Unique to the P-51 was the laminar flow wing design which was developed by the US National Advisory Committee for Aeronautics (NACA). Contemporary aircraft wings featured a wing cross-section with maximum thickness about a fifth of the way across the wing from the leading edge, with most of the camber on the top of the wing. The laminar flow wing, in contrast, has its maximum thickness well aft from the leading edge, and has almost as much camber on top as on the bottom. This feature reduced turbulent flow across the wing, thereby, reducing drag and increasing speed and range. Drag was also reduced by positioning a ventral radiator underneath the rear of the fuselage, to present the smallest possible fuselage cross section. The British Purchasing Commission was enthusiastic about the plane, and confirmed a production order for 320 Mustang Is. This was later increased by 300 for NA-83s, which differed only in minor details; the British designation was Mustang IA.7 Powered by the 1,100 hp Allison V-1710-39 (F3R) engine, the airplanes performance was only impressive up to 15,000 ft. However, performance would be dramatically improved once the airframe was matched with the Rolls Royce Merlin engine. This is not to say that the Allison wasn't a good engine as it performed very well on the Lockheed P-38. The problem with the Allison had more to do with the USAAF's heavy reliance on turbosupercharging. This requirement was impossible to meet for all aircraft, due to a shortage of metal alloys, such as tungsten. There was some experimentation with turbosupercharged P-40s by designer Donaldson R. Berlin and these planes outperformed the Spitfire and Messerschmitt Bf 109.8
A further improvement to the Mustang was introduced when a graceful teardrop canopy was installed to eliminate the dangerous blind area created by the faired cockpit. First tested on two P-51Bs, they became standard on the P-51D and all later models. 280 P-51Ds were given the RAF designation Mustang IV. The P-51D became the version produced in the greatest quantities, 7,954 being completed. The P-51D model carried six .50 cal. machine guns instead of the four mounted in the P-51Bs. Other refinements, such as moving the wing forward slightly and providing for rocket launchers, were included. The first P-51Ds types were delivered without dorsal fins, but this feature was added to compensate for keel-loss when the bubble canopy was adopted.
Later developments to the P-51 series included the final production type, the P-51H with several changes which made it the fastest production variant with a maximum speed of 487 mph at 25,000 feet. Five hundred fifty-five P-51H's were delivered before VJ Day out of an original order for 1,445 machines.13
|