View Single Post
  #19  
Old 09-23-2007, 01:52 PM
cpu_
Guest
 
Posts: n/a
In some of my past tests, I disconnected the Space Command module, as I figured this would eliminate a current path through the primary of the power transformer, and I could eliminate it as a possible source of the problem.

The Space Command has two connectors - one is a harness with a connector (seems to be the AC side), and the other is a circuit board edge connector. The edge connector is a 4-pin that goes to the front panel (It must go to the power switch). Both connectors are now connected.

The circuit breaker is now popping as soon as I plug in the line cord. When I first started looking at this problem the breaker would pop only when the power on button was pressed.
Reply With Quote